Polish Master 4000
Brush Polishing Machine
Description
The Schlafli brush polishing machine Polish Master 4000 precisely
and efficiently brushes sharp edges, burrs and radii of parts made of hard
materials such as Sapphire, Ruby, Ceramics, Zirconia, Tungsten Carbide etc.
The
brushing process allows a significant improvement of the surface quality.
To
enable an optimal polishing operation the parts are placed in holes, or glued
to the 4 working discs of the Polish Master 4000.
During a variable period of time, the parts are processed by means of the rotating
and vertically oscillating polishing brush. A diamond compound is used as an
abrasive medium. Depending on the grain size of the diamond compound and the
specification of the brush varying surface finishes can be achieved.
Typical applications
- Polishing the rear end of ceramic fiberoptic ferrules
- Radii, chamfer, surface and edge polishing of tungsten carbide dies. Cases, ruby, sapphire and industrial jewels also.
- Polishing of sharp edges on sapphire crystals and lenses.
- Polishing of the surfaces of ceramic thread guide parts for textile applications.
- etc.
| Diameter of polishing brush | 380 mm |
| Diameter of 4 working discs | 144 mm |
| Total working surface | 651cm² |
| Rotary speed of polishing brush | Variable in a range of 0 - 160 min-1 |
| Rotary speed of working discs | Variable in a range of 0 - 12 min-1 |
| Oscillation stroke of brush | Variable in a range of 0 - 10 mm |
| Abrasive medium | Diamond compound (different grain sizes available) |
| Change of direction of rotation | Variable in a range of 5sec - 60hrs |
| Dimensions (LxDxH) | 700 mm x 1000 mm x 820 mm |
| Net Weight | 150 kg |
| Supply voltage | 220 VAC 50/60Hz 1PH |
All technical specifications and illustrations are without obligation and subject to change without notice.